Product Info

1. Antenna
2. Encoder: rotate clockwise or counter-clockwise to select the desired channel
3. Power/volume knob-turn clockwise to power on and increase the volume level.
Turn counter-clockwise to decrease the volume level and power off.
4. Speaker
5. Built-in microphone
6. Led indicator: RED: TX; GREEN: RX.
7. PTT: push this button to transmit, release it to receive.
8. Side key 1: hold down this button to activate the Monitor function.
9. Side key 2: shortly press this button to turn on/off the flashlight at the top side of the radio.
10. External Speaker/Mic Jack- allows the connection with external devices such as headsets, microphones.
11. Flashlight
Operations
Power on/off and volume adjustment
Rotate the Power/Volume knob clockwise to turn the radio on. Rotate the control clockwise /counter-clockwise to adjust the
volume level as you prefer. To turn the radio off, rotate the control counter-clockwise till hearing a mechanical “click”.
Transmission
To communicate, all radios in your group must be set to the same channel. Briefly press the Side key 1 to enable the Monitor
feature in order to make sure that the frequency is not busy, and then press the PTT button. Release the PTT key to receive.
Only one user at a time can talk during radio communications. Therefore, it is important not to transmit when you are
receiving a communication and use the transmission mode sparingly to allow other users to talk. Transmission consumes a
significant amount of energy and should therefore be used sparingly to prolong the battery life.