Product Info

Monitor
The Monitor feature is for excluding (opening) the Squelch, in order to listen to signals that are too weak to keep the Squelch
permanently opened. Hold down the Side key 1 to enable such function.
Scan
To enable the Scan function, the scanning will automatically start. Whenever any signal is detected, the scanning will stop on
a busy channel. If the PTT is pressed, you will transmit on the latest busy channel; therefore if you don’t pick up any signal
when you press PTT, the radio will transmit.
Flashlight
With two way radio turned on, shortly press the Side key 2 to turn on/off the flashlight at the top side of the radio.
Prompt voice switch settings
The encoder is selected to the 10th channel. Press and hold the PTT and Side Key 1 to turn on the radio, and turn the
prompt voice on or off.
Turn on the prompt voice function, and there will be voice prompts when the encoder is turned on or operated. If you turn
off the prompt voice function, there is only a “beep” prompt when you turn on or operate the encoder.
Emergency alert function
If necessary, you can per-program the Side Key 1 into the Alarm function via CPS programming software.
Turn on the radio, short press the Side Key 1 to turn on the alarm function. Press the Side Key 1 again to release the
emergency alarm status.
CPS programming path: Edit> Function Setting> Side Key> Alarm