Installation Guide

SUGGESTED TOOLS AND MATERIALS
Philips Screwdriver Silicon Sealant Tape Measure Safety Glasses

1
PARTS / HARDWARE INCLUDED
500001
4x
111213
4x
111214
4x
SINK INSTALLATION
3
INSTALLATION INSTRUCTIONS
STONE VANITY TOP
120003
4x
Apply a continuous bead of quality sealant
to the top surface (rim) of the sink.
Turn the vanity top upside down and place it on a clean,
scratch resistant surface. Center the sink over the cutout.
2
Secure the sink to the top using the mounting kit / hardware provided.
®
For customer support please visit www.xylem.biz or call 866 395 8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
All Sizes
1
BEFORE YOU BEGIN
Observe all local plumbing and building codes.
Follow these instructions only if it apply to your installation.
Before installation, carefully inspect it for damage. Return the vanity top to its packaging until you are ready to install it.
These instructions contain important care and cleaning instructions. Please review these instructions carefully.
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with this
vanity top. These products will stain the surfaces permanentl y.