Installation Guide

SUGGESTED TOOLS AND MATERIALS
Sealant Tape Measure Safety Glasses
10'
1
VESSEL TOP INSTALLATION
3
2
Apply bead of quality sealant evenly
along the top of the vanity
Apply silicone sealant evenly along
the bottom of backsplash and wall
Place the bottom side of back splash with sealant
onto the countertop and check alignment of backsplash.
Adjust the leg levelers as needed
4
Carefully, install the vessel sink, mounting ring
and drain. See manufacturers instructions
** NOTE: Sink style, shape, cutout on top, vanity may vary from the picture above. Instructional purposes only
BEFORE YOU BEGIN
• Observe all local plumbing and building codes.
• Follow these instructions only if it apply to your installation.
• Before installation, carefully inspect it for damage. Return the countertop to its packaging until you are ready to install it.
• These instructions contain important care and cleaning instructions. Please review these instructions carefully.
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with this
countertop. These products will stain the surfaces permanently.
INSTALLATION INSTRUCTIONS
STONE VESSEL TOP
ALL SIZES
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

Summary of content (2 pages)