Manual

11.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

INSTALLATION INSTRUCTIONS

KENT

LINEN TOWER

LT-KENT-ST-18BE / LT-KENT-ST-18WW

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver Level Drill Tape Measure Safety Glasses

10'

THANK YOU FOR CHOOSING RYVYR

Please take a few minutes to review this manual before you start installation. If you

encounter any installation problems, please don’t hesitate to contact us. Before you begin,

please observe all local building codes. Unpack the new product and inspect for damage.

The appearance of your linen tower may differ from the illustrations in this guide. These

instructions still apply. Please ensure the finished wall is straight and plumb and the floor

is flat and perpendicular to the finished wall.

ROUGH-IN DIMENSIONS

12″ [304.8mm] 12.5″ [317.5mm]

33″ [839mm]

26″ [660.4mm]

14″ [355mm]

19″ [483mm]

PAGE 1
INSTALLATION INSTRUCTIONS KENT LINEN TOWER LT-KENT-ST-18BE / LT-KENT-ST-18WW THANK YOU FOR CHOOSING RYVYR Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage. The appearance of your linen tower may differ from the illustrations in this guide. These instructions still apply.
PAGE 2
CARE AND CLEANING • To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing furniture directly under windows. Damage caused by any of the afore mentioned will void the warranty. • Clean the furniture frequently with a clean, soft, dry, lint-free cloth.