Owner manual

INSTALLATION INSTRUCTIONS

SHERRY

MIRROR

M-SHERRY-80OL

10.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

THANK YOU FOR CHOOSING RYVYR

Please take a few minutes to review this manual before you start installation. If you encounter

any installation problems, please don’t hesitate to contact us. Before you begin, please

observe all local building codes. Unpack the new product and inspect for damage. The

appearance of your mirror may differ from the illustrations in this guide. These instructions

still apply. Please ensure the finished wall is straight and plumb and the floor is flat and

perpendicular to the finished wall.

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver Level Drill Tape Measure Safety Glasses

10'

MIRROR INSTALLATION

Finished Wall

FINISHED WALL

FLOOR

1 5/8” [344mm]

width to center of clips

Set desired height for mirror

PAGE 1
INSTALLATION INSTRUCTIONS SHERRY MIRROR M-SHERRY-80OL THANK YOU FOR CHOOSING RYVYR Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage. The appearance of your mirror may differ from the illustrations in this guide. These instructions still apply.
PAGE 2
3 4 To level CARE AND CLEANING • To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing directly under windows. • Clean the mirror using a soft, slightly damp cloth. When cleaning the mirror, spray the mirror with a glass cleaner and wipe clean. Avoid using silicone cleaners and waxes. 10.