Installation Guide

• Our countertops are factory sealed with a penetrating sealer. We highly recommend sealing your countertop before it is first used
with a natural stone sealer. Refer to the instructions on the stone sealer container for proper application.
• Routine cleaning of the countertop will reduce the need for heavy cleaning and polishing.
• Use a soft cloth after each use to minimize soap scum.
• Never use strong / abrasive cleaners. For general cleaning, use mild soap and water or natural stone cleaners. Do not use
abrasive detergents or cleaning pads, which can damage the surface of the stone. Always test your cleaning solution on unnoticeable
areas before applying to the entire surface.
• Never let cleaners sit on the surface of the stone for long periods of time.
• Periodically, re-apply the natural stone sealer as warranted by use. Refer to the instructions on the stone sealer container for
proper application.
SINK INSTALLATION
INSTALLATION INSTRUCTIONS
STONE VANITY TOP
INTEGRATED MODELS
09.2014
For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax [phone] any time
CAUTION! Risk of product damage. Do not use plumbers putty or oil-based sealers with
this vanity top. These products will stain surfaces permanently.
SUGGESTED TOOLS AND MATERIALS
Silicone Sealant Leveler Safety Glasses
VANITY TOP INSTALLATIONS
1. Install the cabinet / vanity according to the cabinet / vanity manufacturer
2. Check to make sure the vanity top sits level on top of the vanity
3. Apply silicone sealant to the top of cabinet / vanity as shown above
4. Install faucet and drain assembly per the manufacturers' instructions
** Sink style, shape, cutout on top, and the vanity may vary from the picture above. Instructional purposes only.
CARE AND CLEANING
PLEASE NOTE: that for use on a Purus vanity or other vanity with solid wood top, additional cutouts in the top of the vanity
may be required to accommodate the plumbing connections for the drain and faucet. For use with the Purus vanity, the
pre-drilled drain hole cutout in the vanity's wood top may be enlarged to 4” x 4” to align with the drain hole in the countertop.
To accommodate the faucet, a 3” x 10” cutout can be made to allow the faucet body and supply lines to recess into the vanity
as needed.
Silicone Sealant