User Manual

ManualsBrandsRyvyr ManualsFurnitureV-SELLA-80MWT

INSTALLATION INSTRUCTIONS

VANITY

V-SELLA-60MXX| V-SELLA-80MXX

SUGGESTED TOOLS AND MATERIALS

Phillips Screwdriver Level Drill Tape Measure Safety Glasses

10'

THANK YOU FOR CHOOSING RYVYR

Please take a few minutes to review this manual before you start installation. If you

encounter any installation problems, please don’t hesitate to contact us. Before you

begin, please observe all local building codes. Unpack the new product and inspect

for damage. Please ensure the finished wall is straight and plumb and the floor is flat

and perpendicular to the finished wall.

ROUGH-IN DIMENSIONS

10.2014

For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.8113 any time

FLOOR

FINISHED

WALL

SELLA

SUGGESTED HEIGHT:

Undermount Application:

13.25” (336.6mm)

Vessel Application:

7.25” (184mm)

Model # Width

V-SELLA-M60XX x = 23.6" y= [600mm]

V-SELLA-M80XX x = 31.5" y= [800mm]

x [y]

20.67" [525mm]

17.7" [450mm]

WALL-MOUNTED

BRACKET

(CONTRACTOR INSTALLED)

WALL-HANGING

BRACKET SYSTEM

6.8" [173mm]

13.7" [348mm]

PRE-MOUNTED

TO VANITY

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS SELLA TM VANITY V-SELLA-60MXX| V-SELLA-80MXX THANK YOU FOR CHOOSING RYVYR Please take a few minutes to review this manual before you start installation. If you encounter any installation problems, please don’t hesitate to contact us. Before you begin, please observe all local building codes. Unpack the new product and inspect for damage. Please ensure the finished wall is straight and plumb and the floor is flat and perpendicular to the finished wall.
PAGE 2
WALL PREPARATION Notch studs 1-1/2” [38mm] to provide support for brace 2x6 Brace Position of Bracket WALL BRACKET ISTALLATION WALL K UNLOC 2x6 Brace BRACKET Position of Brackets UNLOCK X2 • With the screws provided, mount the mounting brackets onto the 2 x 6 brace. 10.2014 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.
PAGE 3
WALL PREPARATION Wall Bracket K UNLOC Pre-Installed Clip * Pre-installed on vanity (left and right) • Installation requires 2 people. • Position the vanity against the finished wall. • Insert vanity clip intothe outside rectangular slot and allow it to drop down until it is seated securely in the wall bracket. WALL BRACKET ADJUSTMENT 22mm 19mm 10.2014 For customer support please visit www.ryvyr.com or call 866.395.8112 weekdays 8:00 to 5:00 EST or fax 866.395.
PAGE 4
DRAWER ADJUSTMENT INSTRUCTIONS SIDE 2 1 2 1 CAM HEIGHT TILT CARE AND CLEANING • To maintain the beauty of the finish, avoid placing the furniture in direct sunlight, as sunlight causes fading. Also avoid extreme changes in temperature by arranging furniture away from radiators, heat and air vents, and air conditioning units. Avoid placing furniture directly under windows. • Dust the vanity frequently with a clean, soft, dry, lint-free cloth, as well as polish it on a regular basis.