Installation Guide

INSTALLATION INSTRUCTIONS

WINDSOR

VANITY

V-WINDSOR-36BN / WT

For customer support please call 866 395 8112 weekdays 8:00 to 5:00 EST or fax 866 395 8113 any time

THANK YOU FOR CHOOSING XYLEM

CODES / STANDARDS APPLICABLE

CALIFORNIA 93120

COMPLIANT FOR

FORMALDEHYDE

Q: What is the California formaldehyde regulation?

A: Starting Jan 1, 2009, the California Air Resources Board (CARB) will implement new limits for formaldehyde emitted

from composite wood products. This CA regulation governs the formaldehyde in raw composite wood panels and finished

products sold or used in California.

Q: Why is California regulating formaldehyde emissions from composite wood products?

A: CARB’s mission is to ensure the best possible air quality for the citizens of California. To achieve that mission, CARB

continuously monitors sources of air pollution in the state and acts to reduce emissions whenever possible.

Q: Do the new standards apply only to products sold in CA?

A: Yes, the CA regulation applies only to products offered for sale or use in CA. However, a number of other states are

already considering adopting the CA regulation.

FAQ:

This product meets or exceeds The California AirResources Board (CARB) standard for Airborne Toxic Control Measure

(ATCM).

Thank you for choosing Xylem products. It is our intention at Xylem Group to

provide you with the finest products at the best prices. We know that your

Xylem selection was one which you carefully made and we want to ensure that

your experience with our products and our company meets your expectations.

We have provided the information contained in our instructions guide so that

your Xylem product can be easily installed for years of enjoyment. Please

review it carefully or have your installer review it. Please note that we reserve

the right to change product specifications, availability and product

characteristics at any time.

If you or your installer need any further information regarding this or any Xylem

product please call us at 866 395 8112, fax us at 866 395 8113 or email us at

info@xylem.biz. Thanks for your patronage! We appreciate you choosing our

Xylem Group products!

SUGGESTED TOOLS AND MATERIALS

Philips Screwdriver Level Drill Tape Measure Safety Glasses

10'

PAGE 1
INSTALLATION INSTRUCTIONS ® WINDSOR TM VANITY V-WINDSOR-36BN / WT THANK YOU FOR CHOOSING XYLEM Thank you for choosing Xylem products. It is our intention at Xylem Group to provide you with the finest products at the best prices. We know that your Xylem selection was one which you carefully made and we want to ensure that your experience with our products and our company meets your expectations.
PAGE 2
INSTALLATION INSTRUCTIONS • Position the vanity against the finished wall. If necessary, turn the leg levelers to achieve level. • Mark the supply and drain locations on the inside of the vanity back wall. • Move the vanity away from the wall and cut the marked supply and drain locations from inside. • Position the vanity against the wall, aligning the supply and drain locations with the cut holes. • Install the countertop, sink, drain and faucet according to the manufacturer’s instructions.