User's Manual

17/4033
2. When you select "2. Attendance"
This operation mode is required when you select the Attendance function alone.
Selecting “2. Attendance”, you can see the sub-menu items as shown below:
- Setup Reader -
1.Set Network
2.Attend.Time
3.Access Control
4.Open Duration
5.Forcing Open
6.Forcing Close
7.Set Time
8.Initialize
Setting network: In Attendance program operation, you need to enter network settings as accurately as possible for
normal use.
1. Select “1.Set Network”
- Setup Reader -
1.Set Network
2.Attend.Time
3.Access Control
4.Open Duration
5.Forcing Open
6.Forcing Close
7.Set Time
8.Initialize
2. Enter an IP address for the reader and press the Enter button.
IP Address
___.___.___.___
3. Enter a gateway and press the Enter button.
Gateway
___.___.___.___
4. Enter a subnet mask and press the Enter button.
Subnet Mask
___.___.___.___