User's Manual
7/4033
Before system use:
How to use buttons
Enter button: enables you to select a menu or enter a number. If SBMS is connected, you can use this button for
set/release.
Esc button: enables you to delete/modify an entered number, to cancel a selection in menu mode, or to go back
to a previous menu.
To change to attendance mgmt/ attendance & exit (or access) mode, press and hold the button for over two
seconds.
If a menu remains unused for more than
five seconds, the screen will revert to the previous menu or go into
attendance mgmt/access mode.
To select a menu, you can press a corresponding number button. If you see the (▼) symbol at the bottom
right of the screen, you can scroll the screen by pressing the "0" button.
Signal tones in operation
No Type Generated tones Operations
1 Beep " Beep" Button operation/motion check
2 Beep Error " Bee-beep" Error indication
3 Beep Ready "Bee-reek" Successful entrance
4 Beep OK "Bee-ri-reek" Successful verification and crime
prevention setting request in registration
When you initially use this product…
In this case, the reader has no data for a master (administrator) or a user. Once the installed reader is powered-up
for the first time, you need to register a master (administrator).
A master can access and manage every function, including user registration addition/deletion and reader
settings. Up to five masters can be registered. (See Registering/deleting a master.)
Registering (adding) a master
When you turn on the reader, the LCD screen displays a message: “-Master Registration- Approach card to be
registered or Input ID”
In order to register the master, using master keypad to enter or
Keypad registration.