User Manual

S1-QS-DB46 Rev. 01
1. Overview
Access Master Card Reader is a machine controlling access management and
making block change in Access Master Controller. Power is supplied by
auxiliary Access Master Power Supply or Access Master Controller.
2. Standard Specifications
2.1 Outlines
1)Form : Used in indoor installation
2)Size : (W)100 × (H)172 × (D)24 [mm]
3)Weight : about 320g
2.2
Electrical Specifications
1)Input Voltage : DC 12V, 500mA
2)Current consumption : Power index 1.3 (less than DC 12V 500mA)
2.3
RF Specifications
This proximity cardreader shall produce an energizing RF field which
couples to the card to transfer power and which shall be modulated for
communication and follows ISO14443 standard.
1)Operating frequency : 13.56MHz
2)Channel : 1 ch
3)Modulation type : ASK
2.4
Use Environment
1)Use temperature : -20℃ ~ +60℃
2)Use humidity : 0% ~ 90% (relative humidity)
3)Installation requirements
- Convenient place for manipulating machine.
- Install on none-metal
- Place which has not direct ray.
- Place which is not affected by heat.
- Place which has not vibration.
- Install at the place that reading distance should be kept more than
3 cm.