Datasheet

The one-piece S-5-H90
clamp was developed to
t standing seam panels
with horizontal seams.
The right way to attach almost anything to metal roofs!
S-5-H90 and S-5-H90 Mini
888-825-3432 | www.S-5.com |
S-5-H90 Clamp
The S-5-H90 is a one-piece clamp
that was developed to securely and
cost-eectively accommodate metal roof
panels with a horizontal seam greater
than 0.65".
Turning the clamp 90 degrees so that the
bolt hole side is facing up, slip the clamp
on the seam and tighten the setscrews.
Go to www.S-5.com/tools for information
about properly attaching S-5!® clamps.
After the clamp is installed, ax
ancillary items using either of the two
threaded bolt holes and bolt provided.
The S-5-H90 is perfect for use with
S-5! ColorGard® and X-Gard™ snow
retention systems and other heavy-duty
applications.
S-5-H90 Mini Clamp
The S-5-H90 Mini is a bit shorter than the
S-5-H90 and has one setscrew and one
threaded bolt hole rather than two. The
mini is the choice for attaching all kinds
of rooftop accessories: signs, walkways,
satellite dishes, antennas, rooftop
lighting, lightning protection systems,
solar arrays, exhaust stack bracing,
conduit, condensate lines, mechanical
equipment—just about anything!*
*S-5! mini clamps are not compatible with, and should not
be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow
retention systems.