Brochure & Specifications

The S-5-N 1.5 clamp is

designed for use on the

most popular 1.5" nail strip

metal roofs.

The right way to attach almost anything to metal roofs!

888-825-3432 | www.S-5.com |

S-5-N 1.5 and S-5-N 1.5 Mini

S-5-N 1.5 Clamp

S-5-N 1.5 and S-5-N 1.5 Mini clamps

were designed with patented S-5!

zero-penetration technology for

application on the popular 1.5" nail strip

metal roof proles and roong types

with similar proles. The clamp boasts

an angular throat that accommodates

most nail strip proles, minimizing the

need to eld crimp. An angled wall with

a nose permits the S-5-N 1.5 to engage

the triangle type proles during the

installation process—there is no longer

a need to hold the clamp in place while

setscrews are tensioned. The combination

of these two features allows the clamp

to sit straighter on the seam. Nail strip

proles just got a whole lot simpler!

S-5-N 1.5 Mini Clamp

The S-5-N 1.5 Mini is a bit shorter

than the S-5-N 1.5 and has one

setscrew rather than two. The mini is

the choice for attaching all kinds of

rooftop accessories: signs, walkways,

satellite dishes, antennas, rooftop

lighting, lightning protection systems,

solar arrays, exhaust stack bracing,

conduit, condensate lines, mechanical

equipment—just about anything!*

*S-5! Mini clamps are not compatible with, and should not

be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

PAGE 1
S-5-N 1.5 and S-5-N 1.5 Mini S-5-N 1.5 and S-5-N 1.5 Mini clamps were designed with patented S-5!® zero‑penetration technology for application on the popular 1.5" nail strip metal roof profiles and roofing types with similar profiles. The clamp boasts an angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. An angled wall with a nose permits the S-5-N 1.
PAGE 2
The S-5-N 1.5 boasts a angular throat that accommodates most nail strip profiles, minimizing the need to field crimp. The S-5-N 1.5 and S-5-N 1.5 Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-N 1.5 is compatible with most common metal roofing materials excluding copper. All included hardware is 300 series stainless steel. Please visit www.S-5.