S-5-R465 Brochure & Specifications

The S-5-R465 clamp is

designed for use on

RIB-ROOF 465, Mirage II,

and roong types with

similar proles.

888-825-3432 | www.S-5.com |

S-5-R465 and S-5-R465 Mini

The right way to attach almost anything to metal roofs!

S-5-R465 Clamp

The S-5-R465 and S-5-R465 Mini are

created specically to t the Zambelli

RIB-ROOF 465, McElroy Metal’s Mirage

II, Rib Roof Metal Systems’ Rib Roof, and

similar roof proles. The S-5-R465 and

S-5-R465 Mini replace the S-5-R, proving

to have more than three times the

holding strength. The clamps are uniquely

designed with opposing setscrews to

maximize holding strength. The patented

round-point setscrews do not penetrate

the weathering membrane of the roof,

nor damage the protective Galvalume

coatings of steel panels. They will not

cause scoring which can lead to roof

material fracture or premature corrosion,

including rust, thereby voiding the roof

manufacturer's warranty.

S-5-R465 Mini Clamp

The S-5-R465 Mini is a bit shorter than

the S-5-R465, having only one setscrew

on each side rather than two. The mini

is the choice for attaching all kinds of

rooftop accessories: signs, walkways,

satellite dishes, antennas, rooftop

lighting, lightning protection systems,

solar arrays, exhaust stack bracing,

conduit, condensate lines, mechanical

equipment—just about anything!*

*S-5! mini clamps are not compatible with, and should not

be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

PAGE 1
S-5-R465 and S-5-R465 Mini The S-5-R465 and S-5-R465 Mini are created specifically to fit the Zambelli RIB-ROOF 465, McElroy Metal’s Mirage II, Rib Roof Metal Systems’ Rib Roof, and similar roof profiles. The S-5-R465 and S-5-R465 Mini replace the S-5-R, proving to have more than three times the holding strength. The clamps are uniquely designed with opposing setscrews to maximize holding strength.
PAGE 2
The strength of the S-5-R465 clamp is in its simple design. The patented round-point setscrews will slightly dimple the metal seam material but not pierce it—leaving roof manufacturers' warranties intact. The S-5-R465 and S-5-R465 Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun.