S-5-R465 Brochure & Specifications
Distributed by
S-5!® Warning! Please use this product responsibly!
Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for
complete information on patents and trademarks. For maximum holding strength, setscrews should
be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be
veried using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel,
and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!
website at www.S-5.com for published data regarding holding strength.
Copyright 2021, Metal Roof Innovations, Ltd. S-5! products are patent protected.
S-5! aggressively protects its patents, trademarks, and copyrights. Version 081721.
The strength of the S-5-R465 clamp is in its simple design. The patented
round-point setscrews will slightly dimple the metal seam material but not
pierce it—leaving roof manufacturers' warranties intact.
M10-1.5
Threaded Hole
Four 3/8-24 X 0.80"
Round-Point Setscrew
M8-1.5 X 16.00 mm
Hex Flange Bolt
The S-5-R465 and S-5-R465 Mini clamps are each
furnished with the hardware shown to the right. Each
box also includes a bit tip for tightening setscrews using
an electric screw gun. A structural aluminum attachment
clamp, the S-5-R465 is compatible with most common
metal roong materials excluding copper. All included
hardware is stainless steel. Please visit www.S-5.com for
more information including CAD details, metallurgical
compatibilities, installation instructions, and specications.
The S-5-R465 clamp has been tested for load-to-failure
results on most major brands of rib roof proles. The
independent lab test data found at www.S-5.com can
be used for load-critical designs and applications. S-5!®
holding strength is unmatched in the industry.
Example Proles
S-5-R465 Mini Clamp
S-5-R465 Clamp