Brochure & Specifications

ManualsBrandsS-5! ManualsSolar & Wind PowerClamp For Roofs With "T" Shaped Seam Configuration

The S-5-T clamp is

specically developed

to t proles having

a "T" shaped seam

conguration.

The right way to attach almost anything to metal roofs!

S-5-T and S-5-T Mini

888-825-3432 | www.S-5.com |

S-5-T Clamp

The S-5-T clamp is specially developed

to fit profiles having a “T” shaped seam

configuration. It will also work on

architectural “single-fold,” or “horizontal

seam” profiles having a horizontal

projection of 5/8” or less. Its two-piece

design allows it to be easily installed

anywhere along the length of the

panel seam.

The S-5-T (illustrated in Steps 1–4) is

perfect for use with S-5!® ColorGard®

snow retention system and other

heavy-duty applications.

Installation is as simple as placing

the clamp on the seam, positioning

the insert piece, and tightening the

patented round-point setscrews to the

specied tension. Then, ax ancillary

items using the bolt provided. Go to

www.S-5.com/tools for information and

tools available for properly attaching

and tensioning S-5! clamps.

S-5-T Mini Clamp

The S-5-T Mini is a bit shorter than

the S-5-T and has one setscrew rather

than two. The mini (illustrated in

the rendering to the right) is the

choice for attaching all kinds of

rooftop accessories: signs, walkways,

satellite dishes, antennas, rooftop

lighting, lightning protection systems,

solar arrays, exhaust stack bracing,

conduit, condensate lines, mechanical

equipment—just about anything!*

*S-5! mini clamps are not compatible with, and should not

be used with, S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

Summary of content (2 pages)

PAGE 1
S-5-T and S-5-T Mini The S-5-T clamp is specially developed to fit profiles having a “T” shaped seam configuration. It will also work on architectural “single-fold,” or “horizontal seam” profiles having a horizontal projection of 5/8” or less. Its two-piece design allows it to be easily installed anywhere along the length of the panel seam. The S-5-T (illustrated in Steps 1–4) is perfect for use with S-5!® ColorGard® snow retention system and other heavy‑duty applications.
PAGE 2
The strength of the S-5-T clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but will not puncture it—leaving roof warranties intact. The S-5-T and S-5-T Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-T is compatible with most common metal roofing materials excluding copper.