Brochure & Specifications

Distributed by

S-5!® Warning! Please use this product responsibly!

Products are protected by multiple U.S. and foreign patents. Visit the website at www.S-5.com for

complete information on patents and trademarks. For maximum holding strength, setscrews should

be tensioned and re-tensioned as the seam material compresses. Clamp setscrew tension should be

veried using a calibrated torque wrench between 160 and 180 inch pounds when used on 22ga steel,

and between 130 and 150 inch pounds for all other metals and thinner gauges of steel. Consult the S-5!

website at www.S-5.com for published data regarding holding strength.

S-5! aggressively protects its patents, trademarks, and copyrights. Version 081721.

The strength of the S-5-T clamp is in its simple design. The patented

setscrews will slightly dimple the metal seam material but will not puncture

it —leaving roof warranties intact.

actual size

S-5-T Mini Clamp

S-5-T Clamp

Please note: All measurements are rounded to the second decimal place.

M8-1.25

Threaded Hole

(2x) M8-1.25

Threaded Hole

M8-1.25 X 16 mm

Hex Flange Bolt

M8-1.25 X 16 mm

Hex Flange Bolt

3/8-24 X 0.80"

Round-Point

Setscrew

Two 3/8-24 X 0.80"

Round-Point

Setscrews

The S-5-T and S-5-T Mini clamps are each furnished with

the hardware shown to the right. Each box also includes

a bit tip for tightening setscrews using an electric screw

gun. A structural aluminum attachment clamp, the S-5-T

is compatible with most common metal roong materials

excluding copper. All included hardware is stainless

steel. Please visit www.S-5.com for more information

including CAD details, metallurgical compatibilities and

specications.

The S-5-T clamp has been tested for load-to-failure results

on a variety of “T” shaped standing seam roof proles from

leading manufacturers of panels. The independent lab test

reports found on our website at www.S-5.com prove that

S-5!® holding strength is unmatched in the industry.

Example Proles

≤ 0.63