Datasheet

The S-5-V clamp is a

versatile clamp, tting

most of the vertical

standing seam proles

in North America.

The right way to attach almost anything to metal roofs!

S-5-V and S-5-V Mini

888-825-3432 | www.S-5.com |

S-5-V Clamp

The S-5-V clamp is a versatile clamp

that ts vertical-folded seam proles

manufactured in North America—

including most structural and

architectural proles.

Its simple design and generous

dimensioning are what make the S-5-V

clamp so versatile for use with the

S-5!® snow retention products, such

as ColorGard®, as well as with other

heavy-duty applications.

Installation is as simple as setting the

patented round-point setscrews into the

clamp, placing the clamp on the seam,

and tightening them to the specied

tension. Then, ax ancillary items using

the stainless steel bolt provided with

the product. Go to www.S-5.com/tools

for information and tools available for

properly attaching and tensioning S-5!

clamps.

S-5-V Mini Clamp

The S-5-V Mini is a bit shorter than

the S-5-V and has one setscrew

rather than two. The mini is the

choice for attaching all kinds of

rooftop accessories: signs, walkways,

satellite dishes, antennas, rooftop

lighting, lightning protection systems,

solar arrays, exhaust stack bracing,

conduit, condensate lines, mechanical

equipment—just about anything!*

*S-5! mini clamps are not compatible with, and should not

be used with S-5! SnoRail™/SnoFence™ or ColorGard® snow

retention systems.

PAGE 1
S-5-V and S-5-V Mini S-5-V Clamp Its simple design and generous dimensioning are what make the S-5-V clamp so versatile for use with the S-5!® snow retention products, such as ColorGard®, as well as with other heavy‑duty applications. Installation is as simple as setting the patented round-point setscrews into the clamp, placing the clamp on the seam, and tightening them to the specified tension. Then, affix ancillary items using the stainless steel bolt provided with the product. Go to www.S-5.
PAGE 2
The strength of the S-5-V clamp is in its simple design. The patented setscrews will slightly dimple the metal seam material but not pierce it— leaving the roof manufacturer's warranty intact. The S-5-V and S-5-V Mini clamps are each furnished with the hardware shown to the right. Each box also includes a bit tip for tightening setscrews using an electric screw gun. A structural aluminum attachment clamp, the S-5-V is compatible with most common metal roofing materials excluding copper.