SnoClip Brochure

The right way to attach almost anything to metal roofs!

SnoClip

™

888-825-3432 | www.S-5.com

SnoClip

™

This aluminum component retards the

migration of snow and ice beneath the

ColorGard® crossmember or SnoFence™

and SnoRail™ systems. It has a special

integrated rubber “foot” to prevent

abrasion of the panel’s nish. SnoClip™

slides onto the back of the crossmember

or rod and extends down to the at of

the roong panel.

IMPORTANT NOTICE! — SnoClip™

design has changed. SnoClip must now

slide on from the end of the ColorGard

crossmember. Be sure to slide SnoClip

onto assembly before attaching

crossmember to clamps. A retrot

SnapClip™ is also available from your

authorized S-5!® distributor.

PAGE 1
SnoClip™ This aluminum component retards the migration of snow and ice beneath the ColorGard® crossmember or SnoFence™ and SnoRail™ systems. It has a special integrated rubber “foot” to prevent abrasion of the panel’s finish. SnoClip™ slides onto the back of the crossmember or rod and extends down to the flat of the roofing panel. IMPORTANT NOTICE! — SnoClip™ design has changed. SnoClip must now slide on from the end of the ColorGard crossmember.
PAGE 2
SnoClip™ retards the migration of snow and ice when used on S-5!® snow retention systems. Slide SnoClip™ onto ColorGard® during installation. One or two clips are used between seams (please visit www.S-5.com for details). Slide the SnoClip onto the back of the crossmember or rod (on SnoFence™, use only on lower rod, never use on top rod) using the lock that results with the rubber “foot” resting properly on the panel surface.