User's Guide

S&C Instruction Sheet 461-506 7
Connect to a TripSaver II Controller Module
Step 3
Obtain Transceiver ID
A Transceiver ID unique to each TripSaver II Controller Module is needed to establish
communications between your computer and the device. The ID consists of a 32-digit
character string in the format of
“0019C900.00020000. _ _ _ _ _ _ _ _ . _ _ _ _ _ _ _ _”.
You must enter the ID in order to communicate with each TripSaver II Controller
Module.
The Transceiver ID is also labelled on the top of the controller module side attached to
each TripSaver II Controller Module when it leaves S&C Electric Company.