User Manual

8 S&C Form 974
Connect to a TripSaver II Controller Module
STEP 3. Obtain the Transceiver ID.
A transceiver ID unique to each TripSaver II controller
module is needed to establish communications between
your computer and the device. See Figure 6. The ID consists
of a 32-digit character string in the format of:
“0019C900.00020000. _ _ _ _ _ _ _ _ . _ _ _ _ _ _ _ _”.
You must enter the ID to communicate with each
TripSaver II controller module.
The transceiver ID is also labeled on the top of the controller
module side attached to each TripSaver II controller module
when it leaves S&C Electric Company.
STEP 4. Connect to Device.
To connect to a TripSaver II controller module, select the
Connection>Connect to Device option from the main
menu or click on the Connect to Device icon in the
quick access toolbar. Make sure the USB transceiver is
already plugged into your computer.
Next, a Transceiver ID Request dialog box will appear.
See Figure 7. Enter the transceiver ID of the TripSaver II
controller module you want to connect to, and click on
the OK button to connect. The first 16 digits of the ID are
pre-typed. You only need to enter the last 16 digits.
During the connection process, a status bar will be
displayed. Wait about 10 seconds for the connection pro-
cess to finish, or click on the Cancel button to cancel the
connection process.
You will be able to see the Status screen after your Trip-
Saver II controller module is successfully connected. Now
viewable are the existing settings, status information, and
event logs of the TripSaver II controller module, or new
settings can be applied to the device.
Enter last 16 digits here
Figure 6. The transceiver ID.
Figure 7. Enter the tranceiver ID number.