User's Manual

12 S&C Instruction Sheet 766-527LD
Click on the Settings entry in the left menu to open the Settings screen. See Figure 9.
Figure 9. The System Name and Firmware Upgrade panels on the Settings screen.
The Settings screen contains the System Name, Firmware Upgrade, Configuration,
and Reboot panels.
NOTICE
When a field edit is typed, the Save button becomes green and must be clicked for
the new entry to be saved.
System Name
Enter a user-dened name for the Host Name setting and click on the Save button. The
name entry is limited to 50 characters. The Host Name entry is displayed in the Name
eld on the General Status screen. The Domain Name entry is not used. See Figure 9.
Firmware Upgrade
This panel enables loading a rmware version onto the Wi-Fi/GPS Unit.
Follow these steps to perform a firmware upgrade:
STEP 1. Download the rmware le to the computer. The rmware les are located in
the S&C Customer Portal at sandc.com/en/support/sc-customer-portal/.
STEP 2. Click on the Upload Firmware File button in the Firmware Upgrade panel.
STEP 3. A Windows dialogue box opens. Navigate to and select the required
rmware le. The le will upload to the Wi-Fi/GPS Unit. When the upload
has completed, the successful upload is conrmed. Then, the Wi-Fi/GPS Unit
veries the installer was securely digitally signed by S&C Electric Company.
STEP 4. After verication, a notication opens. Click on the OK button to dismiss the
notication.
STEP 5. When the Upgrade button becomes active, click on it. This starts the upgrade
process.
STEP 6. When the upgrade process completes, a notication opens. Click on the OK
button. The Wi-Fi/GPS Unit will be unavailable while it reboots. The reboot
takes approximately 5 minutes and the Login screen opens when the reboot is
complete.
STEP 7. Log in and conrm the new rmware has been installed successfully by
checking the General Status screen.
Settings
Wi-Fi Administration