Owner's Manual

...
INSTRUCTIONS
CAUTION: Before using, be sure there is no power to the wire.
For copper wire only. This tool is not designed to strip Teflon
or similar insulations.
3. Squeeze handles tightly. Wire is held
securely by the front jaws while the
insulation is lightly cut by the stripping
blades. ;
Lock
(Lock keeps Wire Stripper
in closed, compact position
for storage.)
Adjustable Strip
Length Gage
Wire Cutter
Hardened Steel
Stripping Blades
2. Place wire between jaws to desired
strip length. Use either the adjustable
gage or the scale for reference.
1. To cut wire, place wire to desired
length between cutter blades and
squeeze handles.
4. Close handles completely to operate a
sliding action for the blades that removes
insulation automatically, resulting in a
clean, neatly stripped end.
-'TOOL AID®
PROFESSIONAL AUTOMOTIVE TOOLS
S & G Tool Aid Corp.
43-53 East Alpine Street, Newark, NJ 07114
973-824-7730
TOLL FREE 800-888-2080 FAX [phone]
www.toolaid.com
©2010 S & G TOOL AID CORP.
II
6 38570 19100 4
Made in Taiwan
for S & G Tool Aid Corp.