Product Manual B

4. Run the rope through the Topper (T19)
- until the rope is centered
on the Topper .
7. Using a ladder and a helper, place the remaining pole sections atop the stand-
ing sections.
8. Pull the end of the rope under the house that is on the side of the rope
cleat. When your house is at the top of the pole, wrap the rope around the Rope
Cleat to hold the rope securely.
Safety Tips:
Common sense must be used.
When high winds are expected, lower all products on your S&K Pole. This will not only protect your
pole, but will also protect your bird house, flags, gourds or other items being used on your S&K Pole.
Plan ahead: Before erecting your pole, be sure trees will not grow close to it through the years.
S&K Manufacturing, Inc. 1001 Liberty Industrial Drive O’Fallon, Mo 63366
www.skmfg.com 1-800-764-8688 Fax: [phone]
1
,IF ANY ITEMS ARE DISCOVERED MISSING
CALL
-800-764-8688
DO NOT RETURN TO STORE.
Note: How rope runs through top
IF USING AN S&K PRODUCT that slides over a round pole, (WARNING - MAKE SURE
THE DOUBLE KNOTS ARE SECURELY FASTENED BELOW THE HOUSE OR
GOURD RACK.) Slide the product over the standing pole sections at this time.
5. To begin the construction of the pole, we recommend you dip each end of the pole into a
bucket of soapy water (dish soap and water) this will make the swedge sections lubricated
and easily slide together. On the ground, after dipping both ends of the pole sections into
the soapy water, push the remaining pole sections together.
Now place the Topper (C) over the unswedged Top pole sections. The Topper (C)
will slide into place on the Top Pole Section (A). Put on the ground next to your standing pole
sections.