User's Manual

E-15
General control (continued)
 APC (Auto Power Off Control) (remote
control)
This sound bar can be set to turn off automatically if
no signal or connection is detected. (During Audio In,
HDMI, Optical In or USB function)
1. Select APC from the remote control menu to adjust
the time.
2. The sound bar will enter the power standby mode
automatically if no signal is detected after the preset
time has elapsed.
 Auto power on
During the stand by mode, the unit will automatically
power on if it detects audio signal from AUDIO IN,
OPTICAL IN or when the BLUETOOTH connection has
been set up between the sound bar and your device.
They will remain connected if there is no HDMI
connection.
Note:
This function is not applicable during demonstration
mode off.
 Auto power off function
The unit will enter eco mode on/off if:
Bluetooth:
- No connection for 1 minute.
- In the pause or stop mode and no incoming signal from
device after approximately 15 minutes.
 Audio Return Channel (ARC)
(Audio Return Channel submenu)
The audio return channel (ARC) function enables an
HDMI ARC-capable TV to send the audio stream to the
HDMI OUT jack of the receiver. To use this function, you
must select the TV ARC input and your TV must supports
the ARC.
 3D sound mode
3D creates 3D sound through speakers regardless of the
type of sound source, whether it is stereo or multichannel.
It simulates sound transmission characteristics using
digital signal processing to create a widening effect on
the sound in the ambient space around the sound source.
By using this technology, multichannel surround sound
can be produced from 2.1ch source.
Select the desired 3D sound from the menu
3D AUDIO 1 :
3D AUDIO 2 :
3D AUDIO 0:
Sound effect that emphasizes 3D
sound.
Sound effect that maintains the 3D
sound and improve vocal clarity.
3D sound effect off.
This product incorporates decoders supporting the
Dolby Audio system.
Dolby Audio
One of the digital audio systems for
theatrical use. You can also enjoy
the stereophonic effect in the home
theater system.
Lights up when detecting Dolby Audio
signal.
PCM
(Pulse Code
Modulation)
This is a general term for digitally
encoded audio signals on a CD or
DVD.
This sound bar lets you enjoy playback
of digital signals from sources such as
CD or DVD.