User's Manual

E-6
Controls and indicators (continued)
10
18171615131211
12
34 56789 19
14
 Remote Control
1. TV Operation Button
2. Bluetooth Pairing Button
3. Display
4. Remote Control Transmitter
5. Sound Mode Button
6. Cursor Left/Fast Reverse/Skip Down button
7. Cursor Up/Play Mode Button
8. Cursor Right/Fast Forward/Skip Up Button
9. ON/STANDBY Button
10. Volume Up Button
11.
Speaker Select Button
12. Menu Button
13. Input Select Button
14. M ute B ut to n
15. Bass /Treble Button
16. Cursor Down Button
17. Play/Pause Button
18. Volume Down Button
19. DC IN Terminal
 Display remote control
To control the sound bar
HT-SB38 comes with a wireless display remote control
which uses Bluetooth to communicate instead of infra
red which requires direct line of sight. You can control
the sound bar from any direction or angle within 32 feet
(10 meters).
To control SHARP TV
This remote control still uses infra red to control SHARP
TV. Point the remote control at the TV remote sensor to
operate the TV.
NOTE:
z In case the remote control is lost or needs repairing,
bring the entire system set to the service center.
 Connecting the remote control
The remote control and sound bar will link automatically
(wirelessly) as it is already pre-linked at the factory.
If the link cannot be established, please set the
connection by the following method.
1. Select PAIRING from the remote control menu. (Refer
to select a menu on the remote control on page 14.)
2. ‘CONNECTED’ will appear on the display when pairing
is successful.
 TV code selection
The default TV code for the remote control is TV CODE
1. In case SHARP TV is not responding to TV operation
button, change the code by selecting TV CODE from the
remote control menu (Refer ‘To select a menu on the
remote control on page 14).
TV Operation Buttons (Only SHARP TV):
On/Standby
Button
Sets the
TV power
to “ON” or
“STANDBY”.
Input Select
Button (TV)
Press the
button to
switch the
input source.
Channel Up
and Down
Buttons
Switch up/
down the TV
channels.
Volume Up
and Down
Buttons
Turn up/
down the TV
volume.
Note:
Some models of SHARP TV may not be operable.