Premium Choice Low Profile Humidity Sensor Module Manual
For more information contact the factory for additional submittal drawings.
S&P will not be responsible for fabrication changes or errors resulting from customer
use of a non-current submittal drawing.
PCLPHS - 2-19-2016
PCLPHS- Premium Choice Humidity Sensor
for PC Low Prole Fans
Features:
• Easy Plug-&-Play design
• Detects rapid rise in humidity
• Senses humidity at ceiling level
• 5-60 minute adjustable timer with auto-shut off.
Factory setting is 20 minutes
• Field adjustable humidity sensitivity with 50-100%
range. Factory setting is 75%
• Can be installed with new fan or as an add-on later
• Meets CALGreen Bathroom Fan Requirement
ACCESSORY MODEL 1 2 3 4 5 REMARKS
Project:
Customer:
Location:
Submitted:
Approved:
A PCLP fan with S&P’s humidity sensing control detects
rapid increases in moisture at the ceiling level where steam
and humidity naturally rise, and automatically turns on
the fan. The sensor easily mounts inside the fan housing
utilizing 1 pre-drilled hole and a standard receptacle.
Standard
Grille
PCLPLEDK PCLPSC PC3S PCMG
PCLPHS
-
The chart below indicates which plug-&-play or other PCLP accessories can be used with the
PCLPHS:
Model
PCLP80
PCLP100
The PCLPHS is compatible with
the following PCLP models: