Instruction Manual
9
CAUTION
Be careful not to grind too deeply and break through to the outside of the cam cover. Damage to the cam cover caused by removing too
much material is not covered under warranty.
See Figure 4.
CAUTION
NOTE: Pushrod adjustment. If using unmodied OEM tappets perform steps 3-A thru 3-D to adjust the pushrods. (See below) If S&S HL2T kit has been
installed in the tappets, proceed to steps 4-A thru 4-F.
3- Pushrod Adjustment Procedures for Unmodied Stock Tappets.
Figure 4
Rotating the engine before the lifters have bled down may damage pushrods and other components not covered under warranty.