Installation Instructions

Bluetooth receiver

MODEL NO. : BTR

Product Overview

Installing Earphone

Attach the earphone by aligning the 3.5 male plug with the receiver and push them in until

they “click”. Pull them pack slightly on each connector to make sure it is fitted securely.

Pairing

PAGE 1
Bluetooth receiver MODEL NO. : BTR Product Overview Installing Earphone Attach the earphone by aligning the 3.5 male plug with the receiver and push them in until they “click”. Pull them pack slightly on each connector to make sure it is fitted securely.
PAGE 2
Push the ON/OFF button to the”On” Place. Press the hold the Multifuction button for about 2 seconds until you hear the headset say “Pairing” and the light flashes red and blue. Open the Bluetooth menu on the device you wish to pair (usually located in Settings > Bluetooth). If needed, select “search for devices”, “add new device”,or “refresh” Select “ MEE audio BTR” and allow pairing to complete. Use “ 0000 “ if a pin is required.
PAGE 3
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.