User's Manual

User Guide for Chrome 400/500 Series Graphics
SG195-B.1 1/6/2009
Page 101
9.4 S3 ScreenToys ChromoVision for HDMI
ACCESS: To enable ChromoVision capabilities for your HDMI device, visit the
Advanced/Options settings page accessible from the S3 ScreenToys Device
Management window. In the Display Devices area, click the HDMI icon. Next
check the Device Status checkbox underneath the icon. In the lower device
settings area, click the Advanced button. Locate the ChromoVision checkbox.
ChromoVision
options
ChromoVision configuration options are usually available
for selection through the Options window.
Use ChromoVision
to display full-
screen video
Click the Use ChromoVision to display full-screen
video checkbox to enable ChromoVision.
When you are using Windows Vista or Windows XP,
ChromoVision allows full screen playback on your digital
HD device, while windowed video plays on another
display device associated with the Primary View. When
enabled, you can move and resize a video window on
your primary DVI or CRT device, and full screen video
will continue on your secondary HDMI, device.
You must be in Clone mode. ChromoVision is not
available when there is only one display output device,
and is not available when you Extend the desktop.
ChromoVision
Modes (for wide
screen devices)
When ChromoVision is enabled (the ChromoVision
(full-screen video) check box is selected) and the
native aspect ratio of your display device is 16:9, then
the ChromoVision Modes options may be available for
optimizing viewing of 4:3 source content on your wide-
screen 16:9 display device.
These modes will not appear if you are not in Clone
mode or if your HDMI display device does not have a
native 16:9 aspect ratio.