User's Guide

© Saab AB, Training & Simulation
12 Introduction 8875 808-522
HGSII
Fig 7. MiniFBSS cartridge
2.3 Pairing information
The Hand grenade simulator can be paired to a PDD, the function (IR
pairing) is optional (Enable/Disable). When the pairing is performed,
the ID number for the PDD will be set in the Hand grenade simulator.
The ID number will be sent to the affected targets at detonation. In the
After Action Review it is possible to see which PDD threw the Hand
grenade simulator. If the function is disabled, the simulator sends ID
number 0. The Hand grenade simulator has to be paired again after a
battery installation and/or after it has been thrown (after detonation).
2.4 Detonation
The safety pin has to be removed before throwing the Hand grenade
simulator. When the Hand grenade simulator is thrown, the safety
lever will automatically be released which triggers the detonation. The
hand grenade simulator detonates after a predefined detonation delay
time (3-5 sec.). Depending on what cartridge is used, the detonation is
characterized in different ways.
A detonation is also triggered when removing the lever unit. Therefore,
it is import
ant to disassemble the simulator in correct order.