User's Guide
Table Of Contents
- Blank Page
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US.pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
© Saab AB, Training & Simulation
24 Operation 8875 808-522
HGSII
WARNING!
Remove the pyro unit before removing the lever unit to
avoid unintentional detonation.
2. Install the cartridge (dummy or Mini FBSS) in the pyro unit.
Fig 14. Cartridge installation
3. Reinstall the pyro unit.
5.3 Pair the simulator with a PDD
(optional)
1. Remove the pyro unit. Make sure status LED double flashes green
every 5th sec.
2. Install the pyro unit.
Note!
Whenever the pyro unit is installed, the IR setup interface is
activated for 2 min. to enable pairing.