User's Guide
Table Of Contents
- Blank Page
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US.pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
5
© Saab AB, Training & Simulation
8875 808-522 Operation 25
HGSII
Note!
When re-pairing a loaded simulator, the pyro unit needs to be
un-installed for 5 sec. before reinstallation to activate the IR
setup interface.
3. Aim the Hand grenade simulator IR setup interface towards the IR
interface on the PDD. Hold the IR interfaces about 10 centimeters
from each other.
4. The PDD will generate a sound message when it is paired with the
Hand grenade simulator.
Note!
The Hand grenade simulator has to be paired again after a
battery installation and after detonation.
5.4 Arm and detonate
Safety conditions
WARNING!
Use helmet, safety glasses and ear protection (in-ear and
normal ear protection) when operating the simulator.
WARNING!
Make sure all participants are wearing helmet, safety
glasses and ear protection (in-ear and normal ear
protection).
1. Make sure the status LED flashes green once every 5th second.