User's Guide
Table Of Contents
- Blank Page
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US.pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
- Hand_Grenade_Simulator__HGSII___DOE_w_FCC_info__US (2).pdf
© Saab AB, Training & Simulation
28 Operation 8875 808-522
HGSII
WARNING!
Remove the pyro unit before removing the lever unit to
avoid unintentional detonation.
2. Remove the lever unit.
3. Make sure all visual parts are clean. To clean the simulator, see
chapter Clean the equipment.
4. Replace the lever unit, i.e. install a new lever/not damaged unit.
5. Replace the cartridge (dummy or Mini FBSS) in the pyro unit.
6. Reinstall the pyro unit.
7. Optional, pair the simulator with a PDD, see chapter Pair the
simulator with a PDD (optional).
Note!
The Hand grenade simulator has to be paired again after
detonation.
5.7 Disarm Hand grenade simulator
1. Remove the pyro unit.
WARNING!
Remove the pyro unit before removing the lever unit to
avoid unintentional detonation.
2. Remove the cartridge.
3. Reinstall the pyro unit.