User's Manual

8 MDS Troubleshooting
Symptom
Cause
Corrective action
No indication of a hit
Detectors covered or dirty
Make sure that the detectors
are clean and facing forward.
Helmet not connected to body
harness
Make sure that the helmet
cable is connected with the
body harness.
No power
Push the volume control in
the PID. If no sound, replace
the battery.
Head harness not powered
up not soft cap halo.
Move the head band (sleep
mode?)
Turn the battery in the head
harnes to right position (+ and
- pole)
Install or replace the battery
in the head harness
11