Operation Manual

11-48 Maintenance and service
2. Remove the electrical connector from
the bulb.
3. Replace the bulb with a new one.
4. Reconnect the electrical connector. At
this time, be careful not to touch the bulb
surface.
5. Install the bulb in the headlight assem-
bly by turning it clockwise until it clicks.
¢ Parking light
q Right-hand side
Non-turbo model
1) Air intake duct
Turbo model
1. Remove the air intake duct mounting
bolt, then remove the air intake duct.
2. Remove the bulb cover by turning it
counterclockwise.
700093
B00483
1
B00484
B00485
A1910BE-A-GSAAB.book Page 48 Tuesday, September 6, 2005 8:37 AM