Operation Manual

26 Safety
Securing a Child Restraint
Designed for the LATCH System
9-5 Sedan:
Before installation, please read through
these instructions and the child restraint
installation instructions.
1 Find the lower anchors for the seating
position you want to use. The lower
anchors are located where the bottom of
the seatback meets the back of the seat
cushion. Above each lower anchor,
there is a label indicating its location
(see picture).
2 Put the child restraint on the seat.
3 Attach and tighten the lower anchor
attachments on the child restraint to the
vehicle lower anchors. If your child
restraint does not have the lower attach-
ments, you will be using the lap-shoul-
der belt to secure the child restraint. The
child restraint instructions will show
you how.
4 The top tether anchor is located on top
of the parcel shelf. Use the top tether
anchor right behind the seating position
you want to use. Open the top tether
anchor trim cover to expose the anchor.
Snap the cover to lock in open position.
5 Raise the vehicle head restraint to its
highest position (see page 21 for
detailed instructions).
6 If you are using a single top tether, route
the top tether under the vehicle head
restraint, and attach the top tether hook
to the top tether anchor. If you are using
a dual top tether, route the top tether
around the vehicle head restraint, and
attach the top tether hook to the top
tether anchor. Tighten the top tether
strap. The child restraint instructions
will show you how.
7 Push and pull the child restraint in differ-
ent directions to be sure it is secured at
the lower anchors/safety belt and the top
tether anchor. The child restraint shall
be firmly attached to the vehicle.
IB1698
Child top tether anchorages in parcel
shelf, Saab 9-5 Sedan
95_US_M08.book Page 26 Friday, May 11, 2007 1:06 PM