Patio Heater User Manual

2 53 29 271

Saab 9-5 B205, B235

1 Read fully through the installation instructions

and check that all the parts are present in the kit.

2 Lay covers on the wings and remove the cap on

the coolant system expansions tank.

3 Raise the car. Use a receptacle to collect the

coolant. Remove the air shield behind the

bumper, connect a hose, open the drain plug

and drain the coolant.

4 Lower the car to a suitable working height for fit-

ting the connector plug to the bumper shell.

WARNING

Take care if the engine is hot. The coolant will also

be hot. You could get burnt if you brush against the

exhaust manifold.

E930A260