SABH0454-S SAB Goblin F3C Landing Gear Manual

389 mm
196 mm
H0450M_Rev01
Please read this user manual carefully, it contains instructions for the correct assembly of the KIT.
Please refer to the website www.goblin-helicopter.com for updates and other important information. Thank You.
F3C Landing Gear ( Position 1 )
Srandard Landing Gear
The H0454 landing gear makes the model position perfectly horizontal against the ground.
The landing gear width of almost 200 mm ensures stability.
F3C Landing Gear ( Position 2 )
There are two positions available to mount the landing gear. Position 1 provides a tail fin clearance of approximately 40 mm.
Position 2 provides less tail fin clearance, but allows the model to sit perfectly horizontal against the ground.
Pos Cod Name Specification Quantity
1 H0003 Frame Spacer Aluminum 2
2 H0007 Finishing Washer M3 Aluminum 8
3 H0447 ESC Carbon Support Urukay Carbon Fiber 2
4 H0450 Top ESC Support Aluminum 1
5 HC050 Socket Head Cap Screw M3x8 mm 8
Page 1
F3C LANDING GEAR
[
H0454-S
]