Raw 700 Manual

1
2
3
MAIN SHAFT REPLACEMENT
For replacing the main shaft:
*Remove the serial number plate.
*Remove the M4x21.5 screw.
*Remove and replace the main shaft.
*Screw in the M4x21.5 screw, with high force and using green loctite.
Main Top
Structure
(H1266-S)
Bearing KIT
8x 16x5
(HC603-S)
Main Shaft
(H1054-S)
Serial Number
(H1108-S)
K Gear Z18 0.75
(H1269-S)
K Gear Z69 0.75
(H1276-S)
Main Structure
(H1267-S)
Bearing KIT
12x 24x6
(HC603-S)
TRANMISSION MODULE
The transmission module is supplied assembled and verified, ready to be used.
Explode and Spare Parts
Use SAB HA076 Grease
inside the module.
Before opening the trasmission
module, use heat to break down the
loctite. (example use a gas torch)
NOTE:
Before removing the M4x22 screw,
use heat to break down the loctite.
(example use a gas torch)
NOTE:
M4x21.5
(HC545-S)
Bearing Support
(H1370-S)
Spacer
4x 6.9x0.5
(HC603-S)
Bushing
12x 16x1.3
(HC603-S)
Bearing KIT
(H1370-S)
Shim
12.1x 16x0.1
( If need to make zero play)
(HC603-S)
Page 39
TRANMISSION MODULE