Raw 700 Manual

- 10 x Plastic Ball Link.
Plastic Ball Link
[H0066-S]
- 5 x Uniballs M3x4 5H3.5.
Uniball M3x4 5H3
[H0065-S]
- 5 x Uniballs M2 5H6.
- 5 x Uniball Spacers.
- 5 x Head Cap Screws M2x8mm.
- 5 x Head Cap Screws M2x6mm.
Uniball M2 5H6
[H0064-S]
- 10 x Finishing Washers M3.
Finishing Washer M3
[H0007-S]
- 4 x Aluminum Blade Spacer.
Aluminum Blade Spacer
[H0158-S]
- 1 x Bearing Support.
- 1 x Flanged Bearing
6x 13x5mm.
- 2 x Head Cap Screws M3x8mm.
Bearing Support
[H0143-S]
-2 x Radius Arms.
-2 x Spacer Arm
3x 5x2.7mm.
-2 x Spacer Arm
2.5x 4x6.3mm.
-2 x Uniball Radius Arms.
-2 x Head Cap Screws M3x16mm.
-2 x Head Cap Screws M2.5x18mm.
-2 x Washers 3x 4x0.5mm.
-2 x Flanged Bearings
2.5x 6x2.5mm.
-2 x Flanged Bearings
3x 7x3mm.
Radius Arm
[H0132BM-S]
- 1 x Spindle Shaft.
- 2 x Button Cap Screw M6x10mm.
- 2 x Washer
6x 14x1.5mm
Spindle
[H0079-S]
- 10 x Servo Spacers.
Servo Spacer
[H0075-S]
- 2 x Plastic Tail Linkage.
- 2 x Grip Link Bushing.
- 2 x Head Cap Screws M2x6mm.
Plastic Tail Linkage
[H0261-S]
- 1 x Motor Pulley 18 to 25T.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing. - 2 x Uniball Radius Arm.
Uniball Radius Arm
[H0205-S]
Motor Pulley
[H0175-18 to 25-S]
- 2 x Main Linkage.
- 4 x Plastic Ball Link.
Main Linkage
[H0417-S]
- 5 x Plastic Ball Link.
Plastic Ball Link
[H0402-S]
Tail Spacer
[H0330-S]
- 2 x Tail Oring Damper.
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
- 1 x Tail Spindle.
- 2 x Button Cap Screws M4x6mm.
Tail Spindle
[H0329-S]
Finishing Washer M2.5
[H0255-S]
- 10 x Finishing Washers M3.
- 1 x Center Hub.
- 2 x Socket Head Cap M4x24mm.
- 2 x Socket Head Cap M3x12mm.
- 1 x Nylon Nut M4.
Center Hub
[H1043-S]
Tail Blade Grips
[H1033-S]
- 2 x Aluminum Tail Blade Grip.
- 4 x Bearing Ø5xØ10x4mm.
- 2 x Thrust bearing Ø5xØ10x4mm.
- 2 x Button Head Cap M4x8mm.
- 2 x Socket Head Cap M2x6mm.
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
Page 41
SPARE PARTS