Raw 700 Manual

- 1 x Blade Grip.
- 1 x Thrust Bearing
10x 18x5.5.
- 2 x Bearing
10x 19x5mm.
- 1 x Washer
10x 16x1mm.
- 1 x Socket Head Cap Screw M4x10.
Main Blade Grips
[H1044-S]
Blade Grip Arm 30
[H1045-S]
- 2 x Blade Grip Arm.
- 2 x Head Cap Screw M4x10mm.
- 2 x Uniball M3x4 Ø5 H3.5.
Damper
[H1046-S]
Swashplate
[H1047-S]
Reference Pin
[H1048-S]
Motor Mount
[H1058-S]
Battery Tray Guide
[H1067-S]
ESC Support
[H1068-S]
- 2 x Damper B.
- 6 x Oring 90 Shore .
- 1 x Swashplate Assembly.
- 7 x Uniball M3.
- 1 x Reference Pin. - 1 x Reference Pin.
- 1 x Motor Mount.
- 2 x Set Screws M5x15mm.
- 2 x Washers
5.3x 15x1mm.
- 2 x Nylon Nuts M5H4.8.
- 2 x Finishing Washers M3.
- 2 x Head Cap Screws M3x10mm.
- 2 x Battery Tray Guide.
- 4 x Head Cap Screws M3x6mm.
- 2 x Head Cap Screws M3x10mm.
- 1 x ESC Support.
- 2 x Head Cap Screws M3x10mm.
- 4 x Nylon Nut M3.
- 1 x Xross Battery. - 1 x Alu Pin.
- 1 x Carbon Pin Support. - 1 x Brass lever.
- 1 x Head Cap M2.5x12. - 2 x Washer M2.5.
- 2 x Head Cap M2.5x8. - 5 x Flat Screws M2.5x5.
Battery Carbon SET
[H1085-S]
- 1 x Tail Shaft.
- 1 x Tail Hub.
- 2 x Tail Oring.
Tail Shaft
[H1089-S]
- 1 x Bell Crank Lever Assembled.
- 1 x Head Cap Screws M3x22mm.
- 1 x Head Cap Screws M2x6mm.
- 2 x Washer
3.2x 6x0.1mm.
Tail Bell Crank Lever
[H1090-S]
Main Shaft
[H1054-S]
- 1 x Main Shaft.
- 1 x Shoulder Screw M4x21.5.
- 2 x Washers
12.1x 16x0.1mm.
Tensioner Idler
[H1066-S]
- 1 x Tail Belt Idler.
- 1 x Bushing.
- 2 x Flanged Bearing
3x 8x3mm.
- 1 x Washer
3x 4.75x0.5mm.
Plastic Landing Gear Support
[H1070-WS]
- 1 x Plastic Support.
- 2 x Set Screws M4x4mm.
- 2 x Nylon Nut M3.
Landing Gear Rod
[H1071-S]
- 2 x Landing Gear Rod.
- 4 x Landing Gear Plug.
- 1 x Bell Crank Base.
- 2 x Head Cap Screws M2.5x8mm.
Bell Crank Base
[H1095-S]
- 1 x Tail Pulley 26T.
- 1 x Set Screws M4x6mm.
Tail Pulley 26T
[H1098-S]
- 1 x Plastic Battery Tray.
- 2 x Double side Tape.
- 1 x Battery Protection.
- 4 x Veclo Strap.
Battery Tray
[H1102-S]
Page 42
SPARE PARTS