Operation Manual

4.2 Factory Setting
Press OK key to enter into the Factory Setting
window.
Select Yes button and press OK key to return to the
factory setting. All searched channels and set
information will be erased.
Select No button and press OK key to cancel this
operation, or press MENU or EXIT key to cancel and
exit.
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between allcode, maincode, defaultdb, userbd and Dump. When
users switch the upgrade mode, Upgrade File will show the corresponding file
according to the table below:
4.3 Upgrade by USB
3.Press OK key on start button to start receiving the data from USB device.
When the USB device is not connected, this item is grey, you can not edit it now.
Upgrade Mode File feature
All code : File named as "*.abs"
Main Code: File named as *.abs
Radio back: File named as "*.abs",
the picture will be used
as both radio back and
menu back
Default db: File named as "*.abs"
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
5. Game
1. Press OK key or key to enter into the game.
2. Press PR+, PR- keys to move the cursor up or
down.
3. Press EXIT key or key to move the focus to
the left menu.
4. Select the game that you want to play and press
OK key to enter into the window.