Operation Manual

19
9.2 FastScan Satellite
In this menu, you can search the channels fast
by select the provider and press OK button on
Start Search item.
9.3 Auto installation
“Auto Installation” is a very new and convenient
function. It will automatically detect all dishes
connecting to this machine and scan the
available services belonging to the satellite
matched according to satellites and
transponders data in current database. You
don’t have to input any parameter of your
antenna settings. Just press “ OK ” button to
enter this “Auto Installation” menu then it starts
scanning and shows you the result at the end of
scanning.
9.4 Satellite Guide
When you enter to “Satellite Guide” menu, you
will see the screen like below:
“Satellite Guide” is use for user to enter local
longitude; local latitude and satellite longitude.
By the evaluation from the receiver evaluate the
antenna azimuth and antenna elevation; user
can follow this guidance to adjust antenna.
1 You can use number keys to input
parameters in “Local Longitude”, “Local
Latitude” and “Satellite Longitude”.
2 You can use [Left/Right] key to select east
or west in “Local Longitude” and “Satellite
Longitude”, select north and south in
“Local Latitude”.
3 Moving highlight to “Start” item and press
[OK] key. The lower column on the screen
will calculate the corresponding value
automatically.
4 Orientation means the angle between
south and satellite.
Press [Exit] key to draw back to “Main” Menu.
10. System
When you enter to “System” menu, you will see
a screen like below: