Operation Manual

22

3.Press [OK] button on Connect item to start
connecting.
a) In this menu you may assign a dynamic IP
address to the digital receiver. To do so, select
the DHCP On.
b) If you have a static IP address, unselect the
DHCP Enable, then the IP Address, Subnet
Mask, Gateway and DNS options become
enabled. You have to set these options
according to your IP address.
c) WiFi Manager
Insert WiFi equipment first, then search available Enter
net signal, input the password to connect with network.
 3G Network
1. Select 3G Network on Link Type item
2. When you inset the 3G dongle, the screen will
display a message like “3G Device plug in “after 14
seconds and will auto connect 3G Network. you will
see picture like the below
3. In this menu,you can press [OK] key to select 3G
Dial setting