Operation Manual

26
turn on the subtitle manually by press
[SUBTITLE] key.
2 Auto Power Down: You can
press[Left/Right] key to select the time or
“Off”, if you select time, duration this time if
no any operation on receiver, it will go to
standby mode.
3 Deep standby: if set to “on”, Press power
key receiver will be in real standby status,
the consumption will less than 0.5 Watt. if
it’s set to “off” ,Press power key, receiver
will be in fake standby status.
4 OSD Timeout: When you switch channels
in full screen, there will show up some
information about current channel on the
lower of the screen. And regarding to the
duration of these information show up on
the screen, you can press [OK] and [up/
down] key to set the time. The range of the
duration is “1 second ~ 10seconds”.
5 Position: control display position of the info
bar in full screen mode. You can choose
“bottom” or “top”.
10.8 Software Upgrade
10.8.1 Upgrade By USB
In this menu you can upgrade the software from
USB conveniently, Press “Left/Right” button
select USB A or USB B; press ' OK ' button to
enter.
In this menu you can select the Upgrade Mode
among Software(No channel list), Channel list,
All SW+bootloader and All SW+Channel list,
and you can select the appropriate upgrade file
on "Upgrade File" item. After you select the
"Upgrade Mode" and "Upgrade File", press ' OK
' button on "Start" item, the receiver can upgrade
automaticlly.
NOTE:
You must put the upgrade file on the /ROOT
DIRECTORY of the USB storage.
10.8.2 Http Upgrade
1. When connected to the Internet, receiver can
manually or automatically make software update
from file from server.
Note: