Operation Manual

27
This function depends on connection with
external server. In case of no software on
server, this function will not work.
10.8.4 Ftp Upgrade
When connected to the Internet, receiver can
make software update from file from FTP server.
Note:
This function depends on connection with
external server. In case of no software on
server, this function will not work.
10.8.5 Upgrade by RS232:
1 We offer the functions for user to connecting
receiver (Master) to the other receiver
(Slave) via serial interface.
Connect master receiver to slave receiver
via serial interface. Enter “Software
Upgrade” menu in master receiver and
press[left/right]keys to switch upgrade
mode： All SW+bootloader /All
SW+Channel list/Software(no channel
list)/Channel list.
2 Moving highlight to “Start” on master reeciver
and press[OK]key to start upgrade.
3 Turn on slave receiver and it needn’t operate
any setting.
4 Press [Exit]key to draw back.
10.8.6 Backup to USB
In this menu ,you can dump the software to the
USB equipment
1.In "Backup file",you can press [OK] key to
edit the file name.; Press “Left/Right” button
select USB A or USB B;
2.In”Mode”, you can press[left/right] key to
select “All” or ” channel list” mode backup to
USB
3.In "Backup to USB", you can press [OK] to
start backup software .
Upgrade By Satellite