Operation Manual

8
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
2.Connecting to the Wi-Fi (Wireless LAN):
You can connect the network via the Wi-Fi access point or DSL/cable modem.
a. Plug in the wireless USB dongle to the USB port.(Separate purchase required)
b. Set the options for the Wi-Fi.
1. Network Name (SSID): Select the network name of your Wi-Fi access point from the list.
2. Security Type (WEP): This product supports WEP 40/128bit ASCII and WEP 40/128bit HEX. The security
type of the Wi-Fi and the product shall be set the same.
3. Password: When using the security type, you must set the password. Enter the same password in the Wi-Fi
setting menu.
3. Connecting to the 3G:
Connect the network via the 3G dongle. Plug in the USB that has 3G dongle.
Note:
1) Make sure the distance between the Wi-Fi access point and the product is not too far away. This may lower the
quality of service.
2) It is recommended to purchase a wireless USB dongle distributed by RT5370. Other products may not function or
respond.
3) It is recommended to purchase a 3G USB dongle distributed by huawei E1750 , E1550 , E1752 , E173 Other
products may not function or respond.
4) We recommend the network connection over a direct LAN.