Specification

● CABINET CONSTRUCTION
Standard, cabinet exterior
construction includes attractive, wear
resistant vinyl on steel in black finish.
Stainless exterior options available.
Standard interior construction utilizes
stainless steel walls, floor and ceiling.
● REFRIGERATION
Refrigeration system uses R290
refrigerant, which is CFC and
HCFC-free for compliance with
environmental safety concerns.
● ELECTRICAL
Units wired at factory and ready for
connection to a 115/60/1 phase,
15 amp dedicated outlet.
● TEMPERATURE
Oversized, factory balanced,
refrigeration system holds 33℉ to
38℉(0.5℃ to 3.3℃)
Model:
24'' Back Bar Cooler:
SBB-24-60G
Glass Swing Door Back Bar Cooler with LED Lighting
SBB-24-60G
● Standard LED light inside of the
cabinet
● Easily accessible condenser coil for
cleaning, and easy service access
● Tempered glass to avoid injury by
broken glasses
Rough-In Data
Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number).
L D H
SBB-24-60G 2
60 3/4
1544
24 3/8
620
35 5/8
905 1/3+
115V/60Hz
220V/50Hz 2.88 5-15P
● Plug type varies by country.
● Height does not includes 3'' casters.
CONFORMS TO NSF/ANSI STD. 7
Capacity
HP Voltage Amps NEMA Config.
SABA
Add: 3390 Enterprise Avenue, Hayward, CA 94545-3228
Tel: [phone] Fax: [phone] E-mail: [e-mail] Website: www.sabacorpusa.com
15.8 cu.ft.
446L
MODEL FEATURES:
Specifications subject to change without notice.
Model Doors
Cabinet Dimensions
(inches / mm)